当前位置:主页>MasterCAM>后处理>常用后处理>
站内搜索:  

三菱带刀库和无刀库三轴铣削后处理

作者:青子 发布时间:2015-03-31 浏览:
软件版本:
教程格式: 其他
文件大小: 28.9 KB
教程介绍 教程下载

本节内容主要介绍了三菱带刀库和无刀库三轴铣削后处理的内容,三菱后处理的基本信息如下:

# Post Name           : MP_EZ
# Product             : MILL
# Machine Name        : GENERIC FANUC
# Control Name        : GENERIC FANUC
# Description         : GENERIC FANUC 3 AXIS MILL POST
# Associated Post     : NONE
# Mill/Turn           : NO
# 4-axis/Axis subs.   : NO
# 5-axis              : NO
# Subprograms         : NO
# Executable          : MP 9.0

三菱带刀库三轴铣削后处理部分程序如下:

sub_level   : 0     #Enable automatic subprogram support
breakarcs   : 1     #Break arcs, 0 = no, 1 = quadrants, 2 = 180deg. max arcs
arcoutput   : 1     #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180
arctype     : 2     #Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.
do_full_arc : 0     #Allow full circle output? 0=no, 1=yes
helix_arc   : 0     #Support helix arc output, 0=no, 1=all planes, 2=XY plane only
arccheck    : 1     #Check for small arcs, convert to linear
atol        : .01   #Angularity tolerance for arccheck = 2
ltol        : .002  #Length tolerance for arccheck = 1
vtol        : .0001 #System tolerance
maxfeedpm   : 500   #Limit for feed in inch/min
ltol_m      : .05   #Length tolerance for arccheck = 1, metric
vtol_m      : .0025 #System tolerance, metric
maxfeedpm_m : 10000 #Limit for feed in mm/min
force_wcs   : yes   #Force WCS output at every toolchange?
spaces      : 0     #Number of spaces to add between fields
omitseq     : no    #Omit sequence numbers?
seqmax      : 9999  #Max. sequence numbers
stagetool   : 0     #0 = Do not pre-stage tools, 1 = Stage tools
use_gear    : 0     #Output gear selection code, 0=no, 1=yes
max_speed   : 10000 #Maximum spindle speed
min_speed   : 50    #Minimum spindle speed
nobrk       : no    #Omit breakup of x, y & z rapid moves
progname    : 1     #Use uppercase for program name (sprogname)

# --------------------------------------------------------------------------
# Enable Canned Drill Cycle Switches
# --------------------------------------------------------------------------
usecandrill : yes   #Use canned cycle for drill
usecanpeck  : yes   #Use canned cycle for Peck
usecanchip  : yes   #Use canned cycle for Chip Break
usecantap   : yes   #Use canned cycle for Tap
usecanbore1 : yes   #Use canned cycle for Bore1
usecanbore2 : yes   #Use canned cycle for Bore2
usecanmisc1 : yes   #Use canned cycle for Misc1
usecanmisc2 : yes   #Use canned cycle for Misc2

三菱无刀库三轴铣削后处理部分程序如下:

arctype   : 2      # Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.
do_full_arc : 0    #Allow full circle output? 0=no, 1=yes
helix_arc   : 0    #Support helix arc output, 0=no, 1=all planes, 2=XY plane only
arccheck  : 1      #Check for small arcs, convert to linear
ltol      : .002   #Length tolerance for arccheck
bldnxtool : yes    # Build next tool table
ldrcode   : 65     # Leader character dec. equiv. (fleader outputs code)
ncldr     : 20     # No. of leader characters (fleader outputs code)
nobrk     : no     # Omit breakup of x/y & z rapid moves
omitcrlf  : no     # Omit CR/LF
omitrefht : no     # Don't use reference height on first non-canned Z move
omitseq   : yes    # Omit sequence no.
progname  : 1      # Use uppercase for program name (sprogname)
seqmax    : 9999   # Max. sequence no.
skipmotest: no     # Skip motion test in linear
spaces    : 0      # No. of spaces to add between fields
tooltable : 0      # Read for tool table and pwrtt
getnxtop  : 1
absswp    : 0      # Absolute sweep
maxfrdeg  : 999    # Limit for feed in deg/min
absinc    : 0      # Absolute/Incremental toggle for modality
tcnt      : 0      # Count the number of tool changes
adelta    : 0      # Calculation for deg/min
ldelta    : 0      # Calculation for deg/min
zdelta    : 0      # Calculation for deg/min
alzdelta  : 0      # Calculation for deg/min
frdelta   : 0      # Calculation for deg/min
frdegcalc : 0      # Calculation for deg/min
circum    : 0      # Calculation for deg/min
rotstrt   : 1      # Flag for first rotary position

# --------------------------------------------------------------------------
# FORMULAS - global formulas
# --------------------------------------------------------------------------
ssrange   = mi3              # Gear Range Select
speed     = abs ( ss )       # Absolute spindle speed
arcradm   = arcrad           # Negative arcrad
spdlsel   = fsg3(ss)         # Spindle on selector based on pos. or neg. ss

教程介绍 教程下载
最新评论
相关内容
提供本内容的用户
热门文章
图纸下载排行 更多>>