当前位置:主页>MasterCAM>后处理>常用后处理>
站内搜索:  

mastercam v9.1西门子810D后处理

作者:青子 发布时间:2015-03-13 浏览:
软件版本:
教程格式: 其他
文件大小: 15.7 KB
教程介绍 教程下载

本节内容主要介绍了mastercam v9.1西门子810D后处理程序,后处理基本信息如下:

# Post Name           : SIEMENS 802s/c
# Product             : MILL
# Machine Name        : JINRI-XK5025
# Control Name        : SIEMENS 802s/c
# Description         : FROM WORKVISION CHENBIN WITH FANUC MILL POST
# Associated Post     : NONE
# Mill/Turn           : NO
# 4-axis/Axis subs.   : NO
# 5-axis              : NO
# Subprograms         : YES
# Executable          : MP 8.00

mastercam v9.1西门子810D后处理部分程序如下:

m_one       : -1    #Define constant
zero        : 0     #Define constant
one         : 1     #Define constant
two         : 2     #Define constant
three       : 3     #Define constant
four        : 4     #Define constant
five        : 5     #Define constant
c9k         : 9999  #Define constant

fastmode    : 1     #Posting speed optimizition
bug1        : 2     #0=No display, 1=Generic list box, 2=Editor
bug2        : 30    #Append postline labels, non-zero is column position?
bug3        : 0     #Append whatline no. to each NC line?
bug4        : 1     #Append NCI line no. to each NC line?
whatno      : yes   #Do not perform whatline branches? (leave as yes)

get_1004    : 1     #Find gcode 1004 with getnextop?
rpd_typ_v7  : 0     #Use Version 7 style contour flags/processing?
strtool_v7  : 2     #Use Version 7+ toolname?
tlchng_aft  : 2     #Delay call to toolchange until move line
cant_tlchng : 1     #Ignore cantext entry on move with tlchng_aft
newglobal   : 1     #Error checking for global variables
getnextop   : 0     #Build the next variable table

# --------------------------------------------------------------------------
# General Output Settings
# --------------------------------------------------------------------------
sextnc .MPF
sub_level   : 1     #Enable automatic subprogram support
breakarcs   : 1     #Break arcs, 0 = no, 1 = quadrants, 2 = 180deg. max arcs

arcoutput   : 0     #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180
arctype     : 2     #Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc.
do_full_arc : 0     #Allow full circle output? 0=no, 1=yes
helix_arc   : 0     #Support helix arc output, 0=no, 1=all planes, 2=XY plane only
arccheck    : 1     #Check for small arcs, convert to linear
atol        : .01   #Angularity tolerance for arccheck = 2
ltol        : .002  #Length tolerance for arccheck = 1
vtol        : .0001 #System tolerance
maxfeedpm   : 500   #Limit for feed in inch/min
ltol_m      : .05   #Length tolerance for arccheck = 1, metric
vtol_m      : .0025 #System tolerance, metric
maxfeedpm_m : 10000 #Limit for feed in mm/min
force_wcs   : yes   #Force WCS output at every toolchange?
spaces      : 0     #No. of spaces to add between fields
omitseq     : yes   #Omit sequence no.
seqmax      : 9999  #Max. sequence no.
stagetool   : 0     #0 = Do not pre-stage tools, 1 = Stage tools
use_gear    : 0     #Output gear selection code, 0=no, 1=yes
max_speed   : 10000 #Maximum spindle speed
min_speed   : 50    #Minimum spindle speed
nobrk       : no    #Omit breakup of x, y & z rapid moves
progname    : 1     #Use uppercase for program name

教程介绍 教程下载
最新评论
相关内容
提供本内容的用户
热门文章
图纸下载排行 更多>>